The data on emissions from vehicular traffic for the first six months in 2023 and 2022 are provided
in the Table below. If an analyst wants to develop a visualization that highlights “The months with
the highest increase in emissions in 2023 as compared to 2022”, then which of the formulas would be
apt to capture the required information for presentation
A.
(Tons of CO2 Emissions in 2023 - Tons of CO2 Emissions in 2022)/ Tons of CO2
Emissions in 2022
B.
(Tons of CO2 Emissions in 2023 - Tons of CO2 Emissions in 2022)
C.
None of these
A published solution is not available for this question yet.
You are solving a regression problem with 8 explanatory variables. The data has 150 observations,
and the R-square value was found to be 0.75. You are adding one more explanatory variable to the
dataset, making a total of 9 variables. The adjusted R square value increases to 0.86. What does it
signify?
A.
The new variable does not improve the model
B.
The new variable alone has high explanatory power
C.
Adjusted R squared can never be greater than R squared. Calculation error
D.
None of these
A published solution is not available for this question yet.
The following is the Primal LP Formulation for a resource allocation problem. Given this, answer
the subquestions
Which of the following is/ are valid **constraints/ objective function** in the dual formulation for the
provided primal formulation
{Note: Xi – represents the i\(^{th}\) decision variable in the dual formulation}
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
Considering a threshold of 0.7, how many “True Positives” are present in the confusion matrix if
the aim is to predict if a student will pass the course?
**NOTE:** Enter the answer as a numeric percentage value rounded to the nearest integer without
the % symbol.
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
Considering a threshold of 0.7, how many “False Positives” are present in the confusion matrix if
the aim is to predict if a student will pass the course?
**NOTE:** Enter the answer as a numeric percentage value rounded to the nearest integer without
the % symbol.
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
Considering a threshold of 0.7, how many “False Negatives” are present in the confusion matrix if
the aim is to predict if a student will pass the course?
**NOTE:** Enter the answer as a numeric percentage value rounded to the nearest integer without
the % symbol.
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
Considering a threshold of 0.7, how many “True Negatives” are present in the confusion matrix if
the aim is to predict if a student will pass the course?
**NOTE:** Enter the answer as a numeric percentage value rounded to the nearest integer without
the % symbol.
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
What is the accuracy of the built logistic model for predicting if a student will **fail** the course if a
threshold of 0.7 is taken?
**NOTE:** Enter the answer as a numeric percentage value rounded to two decimal places without the
% symbol. For example, if your answer is “10.256 %”, enter it as “10.26”
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
What is the precision of the built logistic model for predicting if a student will **pass** the course if a
threshold of 0.7 is taken?
**NOTE:** Enter the answer as a numeric percentage value rounded to the nearest integer without
the % symbol.
A published solution is not available for this question yet.
A logistic regression model is fit to predict if a student will pass the BA course (Y=1 pass, Y=0 fail).
The results of the fitted model are given in the table below. Then answer the given subquestions.
What is the recall of the built logistic model for predicting if a student will **fail** the course if a
threshold of 0.7 is taken?
**NOTE:** Enter the answer as a numeric percentage value rounded to two decimal places without the
% symbol. For example, if your answer is “10.256 %”, enter it as “10.26”
A published solution is not available for this question yet.
You are given the sales volume of three brands, “A”, “B”, and “C” in 4 cities in the table below. Using
this information, answer the given subquestions.
What is the expected frequency of “Chennai” people preferring “Brand-B”?
**NOTE:** If your answer is in decimal, enter it rounded to two decimal places. For example, if your
answer is “10.256”, enter it as “10.26”
A published solution is not available for this question yet.
You are given the sales volume of three brands, “A”, “B”, and “C” in 4 cities in the table below. Using
this information, answer the given subquestions.
What is the expected frequency for “Delhi” people preferring “Brand-C”?
**NOTE:** If your answer is in decimal, enter it rounded to two decimal places. For example, if your
answer is “10.256”, enter it as “10.26”
A published solution is not available for this question yet.
You are given the sales volume of three brands, “A”, “B”, and “C” in 4 cities in the table below. Using
this information, answer the given subquestions.
What is the value of the computed Chi-Square test statistic?
**NOTE:** If your answer is in decimal, enter it rounded to two decimal places. For example, if your
answer is “10.256”, enter it as “10.26”
A published solution is not available for this question yet.
You are given the sales volume of three brands, “A”, “B”, and “C” in 4 cities in the table below. Using
this information, answer the given subquestions.
What is the degrees of freedom for the chi-square test that you perform for this problem?
**NOTE:** Enter your answer to the nearest integer.
A published solution is not available for this question yet.
You are given the sales volume of three brands, “A”, “B”, and “C” in 4 cities in the table below. Using
this information, answer the given subquestions.
At the significance level 0.01, chi-squared tabular value is 16.18. What do you conclude?
A.
Reject the null hypothesis and conclude that the categorical variables are not
independent
B.
Accept the null hypothesis and conclude that the categorical variables are not
independent
C.
Accept the null hypothesis and conclude that the categorical variables are
independent
D.
Reject the null hypothesis and conclude that the categorical variables are
independent
E.
Accept the alternative hypothesis and conclude that the categorical variables
are independent
F.
Fail to accept the alternative hypothesis and conclude that the categorical
variables are not independent
G.
Fail to reject the alternative hypothesis and conclude that the categorical
variables are independent
H.
None of these
A published solution is not available for this question yet.
When performing the goodness of fit test by grouping the given observations into bins, the
expected frequency represents the __ (choose all that are applicable)
A.
Probability Mass Function
B.
Probability Density Function
C.
Cumulative Distribution Function
D.
The actual count of values in the sample that fall in each bin
E.
None of these
A published solution is not available for this question yet.
The relationship between Demand “D” and Selling Price “P” is given by the equation D(p) = 120 –
5*P. If the intention is to maximize the profit, then what is the optimal selling price if the item is
going to be sold at Rs. 20 per unit?
A published solution is not available for this question yet.
There are 6 business units. There are two outputs and one input under consideration. You are
solving the optimization problem for business unit 4 and find that the efficiency is 0.8. You find
that the dual variables corresponding to the constraints of business units 3 and 5 are non-zero
and the dual variables corresponding to the constraints of other units are zero. The dual variables
corresponding to the constraints of business units 3 and 5 are 0.3 and 0.5 respectively. You are
given the following table where sales and number of leads are the two outputs. What is the sales
in HCU 4?
A published solution is not available for this question yet.
The table below provides the summary statistic for a random variable. Then what distribution
could be a good fit for this random variable? (select all that is/are applicable)
A.
Poisson distribution
B.
Symmetric Gaussian distribution
C.
Uniform distribution
D.
Exponential distribution
A published solution is not available for this question yet.
It is an aspect of economic efficiency focussing on maximizing the output
under given constraints.
B.
Productive efficiency does not worry about optimal allocation, or choice of
products
C.
Effective usage of technology for maximizing the revenue
D.
Consists of all combinations of outputs such that the production of one
product cannot be increased without sacrificing the output of the other (without any change in
technology)
E.
Both It is an aspect of economic efficiency focussing on maximizing the output
under given constraints & Productive efficiency does not worry about optimal allocation, or choice
of products
A published solution is not available for this question yet.
There are 7 business units and you are using the DEA to compare them. You solve the LP for
business unit 4. You find from the constraint expression that business unit 2 has obtained an
efficiency of 1 and business unit 7 has obtained an efficiency of 1 with the optimal weights of
business unit 5. Which of the following statements is correct?
A.
Business unit 3 may be inefficient
B.
Business unit 2 will be efficient
C.
Business unit 7 may be inefficient
D.
Business unit 7 will be efficient
**AppDev2**
**Section Id :** 64065338411
**Section Number :** 14
**Section type :** Online
**Mandatory or Optional :** Mandatory
**Number of Questions :** 33
**Number of Questions to be attempted :** 33
**Section Marks :** 100
**Display Number Panel :** Yes
**Group All Questions :** No
**Enable Mark as Answered Mark for Review and**
Yes
**Clear Response :**
**Maximum Instruction Time :** 0
A published solution is not available for this question yet.