MauryaHub PYQ Practice

Business Analytics · End Term · May 2023 · AN

Business Analytics · End Term · May 2023 AN

← Course papers · Start practice / exam

Questions and published explanations below are available without starting a test. Some questions may not have a published solution yet.

0 / 35 published solutions

Question 333 MCQ · 1.0 marks

In an ideal scenario, if a distribution has “Negative Skewness” then,
A.
Mode > Median > Mean
B.
Mode < Median < Mean
C.
Mode = Median = Mean
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q333

Question 334 MCQ · 1.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notation
If the focus is on seeing the distribution of defects (presented in Table-1) across the two locations, then which among the following graphs will be best suited? (Note: While choosing an answer to this question, please do not worry about colour reproduction or other aesthetics. Make a choice only based on the concepts of visualization theory)
A.Source diagram or notation
B.Source diagram or notation
C.Source diagram or notation
D.Source diagram or notation

A published solution is not available for this question yet.

Report a correction for Q334

Question 335 NAT · 1.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notation
If the aim is to determine if the defect occurrence is independent of location, then how many cars would you expect to have “4” defects in Location A? (Round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)

A published solution is not available for this question yet.

Report a correction for Q335

Question 336 NAT · 1.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notation
If the aim is to determine if the defect occurrence is independent of location, then how many cars would you expect to have “1” defect in Location B? (Round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)

A published solution is not available for this question yet.

Report a correction for Q336

Question 337 NAT · 2.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notation
If the aim is to find if the number of defects is independent of location, then what is the value for the test statistic? (Round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)

A published solution is not available for this question yet.

Report a correction for Q337

Question 338 NAT · 2.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notationSource diagram or notation

A published solution is not available for this question yet.

Report a correction for Q338

Question 339 NAT · 1.0 marks

A company produces a car in two locations “A” and “B” using the same manufacturing process. A total of 20 cars in each location were taken and the number of defects in each car was computed. It has been established that the maximum number of defects per car is 5. Given this data in Table- 1, answer the given sub-questions.
Source diagram or notation
For the hypothesis test in the previous question, what (count) is the degrees of freedom?

A published solution is not available for this question yet.

Report a correction for Q339

Question 340 NAT · 1.0 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the direct effect of cooking “baked items” on gas consumption?

A published solution is not available for this question yet.

Report a correction for Q340

Question 341 MCQ · 0.5 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
Is there multi-collinearity present in the data set?
A.
Yes
B.
No

A published solution is not available for this question yet.

Report a correction for Q341

Question 342 NAT · 1.0 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the value of X1?

A published solution is not available for this question yet.

Report a correction for Q342

Question 343 NAT · 1.0 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the value of X2?

A published solution is not available for this question yet.

Report a correction for Q343

Question 344 NAT · 1.0 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the value of X3?

A published solution is not available for this question yet.

Report a correction for Q344

Question 345 NAT · 1.0 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the value of X4?

A published solution is not available for this question yet.

Report a correction for Q345

Question 346 MSQ · 0.5 marks

Chef Jeff is curious to see about his LPG gas connection. He is of the opinion that gas consumption depends on the type of food (“baked items” or “fried items”) he prepares. Hence, over the past month, he has monitored his gas consumption for various items he has prepared (please do not worry about how the data is generated, it is not in the scope of the question). Using this data, Chef Jeff has built several regression models (Model-1, Model-2 and Model-3) which are specified below. He is happy with a 95% Confidence level. Given this information, answer the given subquestions. ( Note: For all the sub-questions, round your answer to two decimal places. Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
Which regression model(s) is (are) significant (select all that is applicable)
A.
Model-1
B.
Model-2
C.
Model-3

A published solution is not available for this question yet.

Report a correction for Q346

Question 347 NAT · 2.0 marks

The demand for cool drinks at different prices in the supermarket at IITM is specified in Figure-1. Given this data, if the demand is expected to follow a constant elasticity curve, then answer the given subquestions (Note: For all the sub-questions, round your answer to two decimal places.Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the elasticity of the demand-response curve?

A published solution is not available for this question yet.

Report a correction for Q347

Question 348 NAT · 1.0 marks

The demand for cool drinks at different prices in the supermarket at IITM is specified in Figure-1. Given this data, if the demand is expected to follow a constant elasticity curve, then answer the given subquestions (Note: For all the sub-questions, round your answer to two decimal places.Eg: If your answer is 10.256, then round it to 10.26)
Source diagram or notation
What is the maximum possible demand for cool drinks at IITM?

A published solution is not available for this question yet.

Report a correction for Q348

Question 349 NAT · 1.0 marks

Source diagram or notation
How many decision variables are present in the dual formulation?

A published solution is not available for this question yet.

Report a correction for Q349

Question 350 NAT · 2.0 marks

Source diagram or notation
How many decision variables in the optimal solution of the dual will have a value of “0”?

A published solution is not available for this question yet.

Report a correction for Q350

Question 351 MSQ · 1.0 marks

Organizations that do not find themselves on the Economic Frontier are called:
A.
Insufficient Technology Frontiers
B.
Inefficient Economic Units
C.
Inefficient Business Units
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q351

Question 352 MSQ · 1.0 marks

If the attribute values in the conjoint analysis is a continuous variable and the data is collected in a pairwise order, then what approach can be used: (select all that is applicable)
A.
Optimization approach
B.
Regression approach
C.
Statistical approach
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q352

Question 353 MSQ · 1.0 marks

In the below diagram, the customer wants to decide between the products O1 & O2, and x denotes the coordinates of the ideal product. Which of the following are true?
Source diagram or notation
A.
Customers will prefer O1 when d2>d1
B.
Customers will prefer O2 when d1<d2
C.
None of these

A published solution is not available for this question yet.

Report a correction for Q353

Question 354 MCQ · 1.0 marks

Identify the most efficient Manufacturing unit from the graph given below. Assume the output of interest is profit and the input as manufacturing cost:
Source diagram or notation
A.
1 Only
B.
2 Only
C.
3 Only
D.
Require more information to identify the most efficient

A published solution is not available for this question yet.

Report a correction for Q354

Question 355 MCQ · 1.0 marks

Identify the efficient business unit(s) from the graph given below:
Source diagram or notation
A.
(5) & (2)
B.
(5), (2) & (4)
C.
(4), (1) & (3)
D.
(2) & (1)

A published solution is not available for this question yet.

Report a correction for Q355

Question 356 MCQ · 1.0 marks

How many dimensions of inputs/outputs be visualized in the graphical method:
A.
2 dimensions
B.
3 dimensions
C.
More than 3 dimensions
D.
Both 2 dimensions and 3 dimensions
E.
2 dimensions , 3 dimensins & More than 3 dimensions

A published solution is not available for this question yet.

Report a correction for Q356

Question 357 MCQ · 1.0 marks

Source diagram or notation
A.Source diagram or notation
B.Source diagram or notation
C.Source diagram or notation
D.Source diagram or notation
E.Source diagram or notation

A published solution is not available for this question yet.

Report a correction for Q357

Question 358 NAT · 3.0 marks

Let us assume 5 DMUs in a DEA problem. Also, assume this as a two inputs and one output problem. Output of all DMUs are 5,00,000 and the reference units for **DMU 1** are 2 and 5. The inputs of DMU 2 are (1,00,000 and 8). Similarly, the inputs of DMU 5 are (75,000 and 10). We are solving the problem for DMU 1, and dual variables for DMU 2 is 0.65 and DMU 5 is 0.35. Calculate the required level of input 1 for HCU 1.

A published solution is not available for this question yet.

Report a correction for Q358

Question 359 NAT · 3.0 marks

Let us assume 5 DMUs in a DEA problem. Also, assume this as two inputs and one output problem. Output of all DMUs are 5,00,000 and the reference units for **DMU 1** are the DMUs 2 and 5. The inputs of DMU 2 are (1,00,000 and 8). Similarly, the inputs of DMU 5 are (75,000 and 10). We are solving the problem for DMU 1, and dual variables for DMU 2 is 0.65 and DMU 5 is 0.35. Calculate the required level of input 2 for HCU 1.

A published solution is not available for this question yet.

Report a correction for Q359

Question 360 NAT · 2.0 marks

In a conjoint problem with 4 products and 2 attributes, how many pair-wise preferences are possible?

A published solution is not available for this question yet.

Report a correction for Q360

Question 361 NAT · 1.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
How many “True Positives” is the model predicting?

A published solution is not available for this question yet.

Report a correction for Q361

Question 362 NAT · 1.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
How many “True Negatives” is the model predicting?

A published solution is not available for this question yet.

Report a correction for Q362

Question 363 NAT · 1.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
How many “False Positives” is the model predicting?

A published solution is not available for this question yet.

Report a correction for Q363

Question 364 NAT · 1.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
How many “False Negatives” is the model predicting?

A published solution is not available for this question yet.

Report a correction for Q364

Question 365 NAT · 1.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
What is the accuracy of the model? (Note: Give your answer in **DECIMAL Values** rounded to two digits. For example, if your answer is “0.256”, then enter it as “0.26”)

A published solution is not available for this question yet.

Report a correction for Q365

Question 366 NAT · 2.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
What is the precision of the model in predicting the “Negative class”? (Note: Give your answer in **DECIMAL Values** rounded to two digits. For example, if your answer is “0.256”, then enter it as “0.26”)

A published solution is not available for this question yet.

Report a correction for Q366

Question 367 NAT · 2.0 marks

Using the below confusion matrix answer the given subquestions.
Source diagram or notation
What is the recall of the model in predicting the “Positive class”? (Note: Give your answer in **DECIMAL Values** rounded to two digits. For example, if your answer is “0.256”, then enter it as “0.26”)

A published solution is not available for this question yet.

Report a correction for Q367