Two factories “A” and “B” produce radios. Each radio produced at factory-A is defective with
probability 0.05, whereas each radio produced at factory-B is defective with probability 0.1. You
purchase two radios that were produced in the same factory (which is equally likely to have been
either factory-A or factory-B). If the first radio that you check is defective, what is the conditional
probability that the second radio is also defective? (Note: Enter your **answer in decimals** rounded to
two decimal places. For example, if your answer is “0.456” then **enter it as “0.46”**)
A published solution is not available for this question yet.
Milo’s Survey Services (MSS) specializes in evaluating the reaction of customers to new products. A
client has hired MSS to ascertain customer reaction to a recently launched product (Frying Pan).
During meeting with the client, MSS agreed to conduct door-to-door personal interviews to obtain
responses from households with children and without children. In addition, MSS agreed to
conduct both “Daytime” and “Evening time” interviews. Specifically, the client’s contract called for
MSS to conduct 1000 interviews under the following quota guidelines
i. Interview at least 400 households with children
ii. Interview at least 400 households without children
iii. The total number of households interviewed during evening must be at least as great as the
number of households interviewed during the day
iv. At least 40% of the interviews for households with children must be conducted during the
evening
v. At least 60% of the interviews for households without children must be conducted during
evening
Because the interviews for households with children take additional interview time and because
evening interviewers are paid more than daytime, the cost varies with type of interview. Based on
previous surveys conducted, MSS estimates the interview costs as given in Table-1
MSS wanted to conduct the interviews so that the overall cost for conducting the survey is
minimized. Given this information, answer the subquestions.
How many (count of) decision variables are present in the standard form of the primal?
A published solution is not available for this question yet.
Milo’s Survey Services (MSS) specializes in evaluating the reaction of customers to new products. A
client has hired MSS to ascertain customer reaction to a recently launched product (Frying Pan).
During meeting with the client, MSS agreed to conduct door-to-door personal interviews to obtain
responses from households with children and without children. In addition, MSS agreed to
conduct both “Daytime” and “Evening time” interviews. Specifically, the client’s contract called for
MSS to conduct 1000 interviews under the following quota guidelines
i. Interview at least 400 households with children
ii. Interview at least 400 households without children
iii. The total number of households interviewed during evening must be at least as great as the
number of households interviewed during the day
iv. At least 40% of the interviews for households with children must be conducted during the
evening
v. At least 60% of the interviews for households without children must be conducted during
evening
Because the interviews for households with children take additional interview time and because
evening interviewers are paid more than daytime, the cost varies with type of interview. Based on
previous surveys conducted, MSS estimates the interview costs as given in Table-1
MSS wanted to conduct the interviews so that the overall cost for conducting the survey is
minimized. Given this information, answer the subquestions.
Excluding the non-negativity constraint, how many (count of) constraints are present in the
standard form of the primal?
A published solution is not available for this question yet.
Milo’s Survey Services (MSS) specializes in evaluating the reaction of customers to new products. A
client has hired MSS to ascertain customer reaction to a recently launched product (Frying Pan).
During meeting with the client, MSS agreed to conduct door-to-door personal interviews to obtain
responses from households with children and without children. In addition, MSS agreed to
conduct both “Daytime” and “Evening time” interviews. Specifically, the client’s contract called for
MSS to conduct 1000 interviews under the following quota guidelines
i. Interview at least 400 households with children
ii. Interview at least 400 households without children
iii. The total number of households interviewed during evening must be at least as great as the
number of households interviewed during the day
iv. At least 40% of the interviews for households with children must be conducted during the
evening
v. At least 60% of the interviews for households without children must be conducted during
evening
Because the interviews for households with children take additional interview time and because
evening interviewers are paid more than daytime, the cost varies with type of interview. Based on
previous surveys conducted, MSS estimates the interview costs as given in Table-1
MSS wanted to conduct the interviews so that the overall cost for conducting the survey is
minimized. Given this information, answer the subquestions.
MSS has decided to conduct 400 interviews for Households with children and 600 interviews for
households without children. Moreover, of the 400, 240 are to be conducted in the daytime.
Similarly, of the 600 interviews, 360 are going to be conducted in the evening.
Then, what is the total cost that would be incurred by MSS? (Note: enter your **answer in “Rupees”**
rounded to two decimal places without the “₹” symbol. For example, if your answer is “₹123.456” then
**enter it as “123.46”**)
A published solution is not available for this question yet.
Milo’s Survey Services (MSS) specializes in evaluating the reaction of customers to new products. A
client has hired MSS to ascertain customer reaction to a recently launched product (Frying Pan).
During meeting with the client, MSS agreed to conduct door-to-door personal interviews to obtain
responses from households with children and without children. In addition, MSS agreed to
conduct both “Daytime” and “Evening time” interviews. Specifically, the client’s contract called for
MSS to conduct 1000 interviews under the following quota guidelines
i. Interview at least 400 households with children
ii. Interview at least 400 households without children
iii. The total number of households interviewed during evening must be at least as great as the
number of households interviewed during the day
iv. At least 40% of the interviews for households with children must be conducted during the
evening
v. At least 60% of the interviews for households without children must be conducted during
evening
Because the interviews for households with children take additional interview time and because
evening interviewers are paid more than daytime, the cost varies with type of interview. Based on
previous surveys conducted, MSS estimates the interview costs as given in Table-1
MSS wanted to conduct the interviews so that the overall cost for conducting the survey is
minimized. Given this information, answer the subquestions.
MSS has decided to conduct 400 interviews for Households with children and 600 interviews for
households without children. Moreover, of the 400, 240 are to be conducted in the daytime.
Similarly, of the 600 interviews, 360 are going to be conducted in the evening.
Then, how many (count of) decision variables will have a **NON-ZERO VALUE** in dual formulation
which is obtained based on the standard form of the primal?
A published solution is not available for this question yet.
The BS program coordinators wanted to understand the difficulty level of the BA course. Hence,
past learners of the BA course were asked to give a rating (on a scale of 1 to 5, 1 meaning “least
difficult” and 5 implying “most difficult”). A total of 200 students (100 male and 100 female) were
approached for the survey and the result of the same is provided in Table-2. Given this data,
answer the sub-questions.
If the aim is to determine if the difficulty level is independent of gender, then how many male
responses would you expect to choose the rating value of “3”? (Note: Enter your **answer in decimal**
**value** rounded to two decimal places. For example, if your answer is “123.456” then **enter it as**
**“123.46”**)
A published solution is not available for this question yet.
The BS program coordinators wanted to understand the difficulty level of the BA course. Hence,
past learners of the BA course were asked to give a rating (on a scale of 1 to 5, 1 meaning “least
difficult” and 5 implying “most difficult”). A total of 200 students (100 male and 100 female) were
approached for the survey and the result of the same is provided in Table-2. Given this data,
answer the sub-questions.
If the aim is to determine if the difficulty level is independent of gender, then how many female
responses would you expect to choose the rating value of “5”? (Note: Enter your **answer in decimal**
**value** rounded to two decimal places. For example, if your answer is “123.456” then **enter it as**
**“123.46”**)
A published solution is not available for this question yet.
The BS program coordinators wanted to understand the difficulty level of the BA course. Hence,
past learners of the BA course were asked to give a rating (on a scale of 1 to 5, 1 meaning “least
difficult” and 5 implying “most difficult”). A total of 200 students (100 male and 100 female) were
approached for the survey and the result of the same is provided in Table-2. Given this data,
answer the sub-questions.
If the aim is to find if the difficulty level is independent of gender, then what is the value for the
test statistic? (Enter your **answer in decimals** rounded to two decimal places. Eg: If your answer is
10.256, **then enter it as 10.26**)
A published solution is not available for this question yet.
The BS program coordinators wanted to understand the difficulty level of the BA course. Hence,
past learners of the BA course were asked to give a rating (on a scale of 1 to 5, 1 meaning “least
difficult” and 5 implying “most difficult”). A total of 200 students (100 male and 100 female) were
approached for the survey and the result of the same is provided in Table-2. Given this data,
answer the sub-questions.
Assuming that each difficulty level splits the probability space into equal areas, the general belief
is that the level of difficulty across all learners follows a normal distribution. To validate this belief,
what is the value of the computed test statistic? (Enter your **answer in decimals** rounded to two
decimal places. Eg: If your answer is 10.256, **then enter it as 10.26**)
A published solution is not available for this question yet.
The BS program coordinators wanted to understand the difficulty level of the BA course. Hence,
past learners of the BA course were asked to give a rating (on a scale of 1 to 5, 1 meaning “least
difficult” and 5 implying “most difficult”). A total of 200 students (100 male and 100 female) were
approached for the survey and the result of the same is provided in Table-2. Given this data,
answer the sub-questions.
For the hypothesis test focusing on whether the data is distributed normally, how many (count of)
degrees of freedoms is present?
A published solution is not available for this question yet.
A doctor is of the opinion that “Blood Pressure (BP)” is affected by “Age” and “Weight”.
Based on past data, the correlation between these three variables is identified and provided in
Table-3. Then answer the given subquestions.
If a linear regression model is built between “BP” and “Age”, then how much percentage of
variability in BP can be explained by Age? (Note: Enter your **answer in percentage** rounded to two
decimal places. Eg: If your answer is “10.256%”, then **enter the answer as “10.26”**)
A published solution is not available for this question yet.
A doctor is of the opinion that “Blood Pressure (BP)” is affected by “Age” and “Weight”.
Based on past data, the correlation between these three variables is identified and provided in
Table-3. Then answer the given subquestions.
What is the VIF for “Weight” with respect to “Age”? (Note: Enter your **answer in decimal** rounded to
two decimal places. Eg: If your answer is “10.256”, then **enter it as “10.26”**)
A published solution is not available for this question yet.
A logistic model is built to classify three types of animals: “Cat”, “Dog” and “Pig”. The confusion
matrix for the model based on 30 samples is presented in Table-4.
Based on the above data, answer the given subquestions
What is the accuracy of the model? (Note: Enter your **answer in percentage** rounded to two decimal
places. Eg: If your answer is “10.256%”, then **enter the answer as “10.26”**)
A published solution is not available for this question yet.
A logistic model is built to classify three types of animals: “Cat”, “Dog” and “Pig”. The confusion
matrix for the model based on 30 samples is presented in Table-4.
Based on the above data, answer the given subquestions
What is the precision of the model for predicting “Dog”? (Note: Enter your **answer in percentage**
rounded to two decimal places. Eg: If your answer is “10.256%”, then **enter the answer as “10.26”**)
A published solution is not available for this question yet.
We are interested in understanding the efficiency of 5 Sales Offices. Each of the Sales Offices has
an approved budget and a team size for achieving a fixed target of 20,00,000. As a Business
Analyst, you must formulate a DEA problem using Linear programming for the **Sales Office 3**.
Answer subquestions using the Table below.
What is the objective function?
A.B.C.D.E.
A published solution is not available for this question yet.
We are interested in understanding the efficiency of 5 Sales Offices. Each of the Sales Offices has
an approved budget and a team size for achieving a fixed target of 20,00,000. As a Business
Analyst, you must formulate a DEA problem using Linear programming for the **Sales Office 3**.
Answer subquestions using the Table below.
What is the type constraint?
A.B.C.D.
A published solution is not available for this question yet.
We are interested in understanding the efficiency of 5 Sales Offices. Each of the Sales Offices has
an approved budget and a team size for achieving a fixed target of 20,00,000. As a Business
Analyst, you must formulate a DEA problem using Linear programming for the **Sales Office 3**.
Answer subquestions using the Table below.
Which of them is not a constraint for the LP problem pertaining to Sales Office 3?
A.B.C.D.E.F.
A published solution is not available for this question yet.
There are 5 business units. There are two outputs and one input under consideration. You are
solving the optimization problem for business unit 3 and find that the efficiency to be 0.6. You find
that the dual variables corresponding to the constraints of business units 2 and 4 are non-zero
and the dual variables corresponding to the constraints of other units are zero. The dual variables
corresponding to the constraints of business units 2 and 4 are 0.25 and 0.35, respectively. You are
given the following table where sales and number of leads are the two outputs.
Based on the above data, answer the given subquestions.
How much will the Output 1 in HCU 3?
**NOTE:** For every step performed round off 4 decimal places.
A published solution is not available for this question yet.
There are 5 business units. There are two outputs and one input under consideration. You are
solving the optimization problem for business unit 3 and find that the efficiency to be 0.6. You find
that the dual variables corresponding to the constraints of business units 2 and 4 are non-zero
and the dual variables corresponding to the constraints of other units are zero. The dual variables
corresponding to the constraints of business units 2 and 4 are 0.25 and 0.35, respectively. You are
given the following table where sales and number of leads are the two outputs.
Based on the above data, answer the given subquestions.
How much will the Output 2 in HCU 3?
**NOTE:** For every step performed round off 4 decimal places.
A published solution is not available for this question yet.
As a Business Analyst, we are trying to find the DMUs that are efficient, where there are 2 inputs
(Team Size & Budget) and one constant output. Based on the graph given below, answer the
subquestions
Which DMUs are in the economic frontier?
A.
(1,2,4)
B.
(1,3,5)
C.
(1,2,4,5)
D.
(1,3,4)
A published solution is not available for this question yet.
As a Business Analyst, we are trying to find the DMUs that are efficient, where there are 2 inputs
(Team Size & Budget) and one constant output. Based on the graph given below, answer the
subquestions
Which DMUs are the reference units for DMU 2?
A.
(1,4)
B.
(1,3)
C.
(3,5)
D.
(3,4)
A published solution is not available for this question yet.
As a Business Analyst, we are trying to find the DMUs that are efficient, where there are 2 inputs
(Team Size & Budget) and one constant output. Based on the graph given below, answer the
subquestions
Which DMUs are the reference units for DMU 4?
A.
(1,4)
B.
(1,3)
C.
(3,5)
D.
(3,4)
A published solution is not available for this question yet.
The table below contains the details of 6 customers who have applied for a bike loan. Based on the
2 inputs (X1 & X2), the bank must decide whether to provide the bike loan or not. In addition, the
actual decision on the loan is provided in the column (Y_act).
A senior Business Analyst used logistic regression and computed the below values. Based on the
data provided answer the subquestions
What is the accuracy of the logistic regression model? **Hint:** Round off your answer to two decimal
places and if your answer is 0.5543, please enter it as 55.43
A published solution is not available for this question yet.
The table below contains the details of 6 customers who have applied for a bike loan. Based on the
2 inputs (X1 & X2), the bank must decide whether to provide the bike loan or not. In addition, the
actual decision on the loan is provided in the column (Y_act).
A senior Business Analyst used logistic regression and computed the below values. Based on the
data provided answer the subquestions
What is the precision of class 1? **Hint:** Round off your answer to two decimal places and if your answer
is 0.5543, please enter it as 55.43
A published solution is not available for this question yet.
The table below contains the details of 6 customers who have applied for a bike loan. Based on the
2 inputs (X1 & X2), the bank must decide whether to provide the bike loan or not. In addition, the
actual decision on the loan is provided in the column (Y_act).
A senior Business Analyst used logistic regression and computed the below values. Based on the
data provided answer the subquestions
What is the sensitivity? **Hint:** Round off your answer to two decimal places and if your answer is
0.5543, please enter it as 55.43
A published solution is not available for this question yet.
The table below contains the details of 6 customers who have applied for a bike loan. Based on the
2 inputs (X1 & X2), the bank must decide whether to provide the bike loan or not. In addition, the
actual decision on the loan is provided in the column (Y_act).
A senior Business Analyst used logistic regression and computed the below values. Based on the
data provided answer the subquestions
What is the precision of class 0? **Hint:** Round off your answer to two decimal places and if your answer
is 0.5543, please enter it as 55.43
A published solution is not available for this question yet.
The table below contains the details of 6 customers who have applied for a bike loan. Based on the
2 inputs (X1 & X2), the bank must decide whether to provide the bike loan or not. In addition, the
actual decision on the loan is provided in the column (Y_act).
A senior Business Analyst used logistic regression and computed the below values. Based on the
data provided answer the subquestions
What is the specificity? **Hint:** Round off your answer to two decimal places and if your answer is
0.5543, please enter it as 55.43
A published solution is not available for this question yet.
If the attribute values in the conjoint analysis is a continuous variable and the data is collected in a
pairwise order, then what approach can be used:
A.
Optimization approach
B.
Regression approach
C.
Statistical approach
D.
Optimization approach or Statistical approach
A published solution is not available for this question yet.