MauryaHub PYQ Practice

Business Analytics · End Term · May 2026 · AN

Business Analytics · End Term · May 2026 AN

← Course papers · Start practice / exam

Questions and published explanations below are available without starting a test. Some questions may not have a published solution yet.

0 / 33 published solutions

Question 2 MCQ · 1.0 marks

A state health department runs **5 district hospitals (5 DMUs)**. Input = monthly budget (INR 5,00,000, same for all). Outputs = Patients Treated (O1) and Successful Surgeries (O2).
Source diagram or notation
The LP formulation of the DEA problem for Hospital 4.
Source diagram or notation
Answer the given sub-questions.
Fill in the correct value a.
A.
x23
B.
y14
C.
x14
D.
y41

A published solution is not available for this question yet.

Report a correction for Q2

Question 3 MCQ · 1.0 marks

A state health department runs **5 district hospitals (5 DMUs)**. Input = monthly budget (INR 5,00,000, same for all). Outputs = Patients Treated (O1) and Successful Surgeries (O2).
Source diagram or notation
The LP formulation of the DEA problem for Hospital 4.
Source diagram or notation
Answer the given sub-questions.
Fill in the correct value b.
A.
y24
B.
x24
C.
x22
D.
x42

A published solution is not available for this question yet.

Report a correction for Q3

Question 4 MCQ · 1.0 marks

A state health department runs **5 district hospitals (5 DMUs)**. Input = monthly budget (INR 5,00,000, same for all). Outputs = Patients Treated (O1) and Successful Surgeries (O2).
Source diagram or notation
The LP formulation of the DEA problem for Hospital 4.
Source diagram or notation
Answer the given sub-questions.
Fill in the correct value c.
A.
x14
B.
x22
C.
y22
D.
y24

A published solution is not available for this question yet.

Report a correction for Q4

Question 5 NAT · 2.0 marks

You are solving the optimization problem for business unit 4 and find that the efficiency is 0.80. You also find that the dual variables corresponding to the constraints of business units 2 and 5 are non-zero, and the dual variables corresponding to the constraints of other business units are zero. The dual variables corresponding to the constraints of business units 2 and 5 are 0.5 and 0.3, respectively. Then answer the given sub-questions
How many Patients must be treated in the HCU 3? (Note: Enter your answer in decimal values rounded to TWO decimal places. For example, if your answer is “1.235”, then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q5

Question 6 NAT · 2.0 marks

You are solving the optimization problem for business unit 4 and find that the efficiency is 0.80. You also find that the dual variables corresponding to the constraints of business units 2 and 5 are non-zero, and the dual variables corresponding to the constraints of other business units are zero. The dual variables corresponding to the constraints of business units 2 and 5 are 0.5 and 0.3, respectively. Then answer the given sub-questions
How many surgeries will be performed in the HCU 3? (Note: Enter your answer in decimal values rounded to TWO decimal places. For example, if your answer is “1.235”, then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q6

Question 7 MSQ · 1.0 marks

You are solving the optimization problem for business unit 4 and find that the efficiency is 0.80. You also find that the dual variables corresponding to the constraints of business units 2 and 5 are non-zero, and the dual variables corresponding to the constraints of other business units are zero. The dual variables corresponding to the constraints of business units 2 and 5 are 0.5 and 0.3, respectively. Then answer the given sub-questions
In DEA, when can the Linear Programming model be used for calculating the weights of efficiency (weighted outputs/weighted inputs)? (select all that is/are applicable)
A.
After converting the ratio into the linear objective function
B.
After normalizing the denominator
C.
By setting a constraint on the efficiency of all DMUs to be less than or equal to 1
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q7

Question 8 NAT · 1.5 marks

**The following scenario is purely hypothetical** You are in the process of selecting an ideal EV scooter from several available options. The decision depends on three key attributes: • **Brand**: TVS, Ola, and Ather • **Water Resistance**: IP67 (Yes or No) • **Battery Packs (KW)**: 2 KW, 4 KW, and 6 KW Your preferences are as follows: • Among brands, **TVS is the least preferred, followed by Ola, while Ather is the most** **preferred EV brand**. • **IP67 type is the preferred** rating. • For battery capacity, **6 KW > 4 KW > 2 KW** in terms of performance and preference. Using these inputs, you build a **regression model** to quantify your preferences. The estimated coefficients of the model are provided in the figure below.
Source diagram or notation
Using this information answer the given subquestions.
What is the part worth to the customer if he/she upgrades from a 4 KW to a 6 KW battery pack? (Note: Enter your answer in decimal values rounded to TWO decimal places. For example, if your answer is “1.235”, then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q8

Question 9 NAT · 1.5 marks

**The following scenario is purely hypothetical** You are in the process of selecting an ideal EV scooter from several available options. The decision depends on three key attributes: • **Brand**: TVS, Ola, and Ather • **Water Resistance**: IP67 (Yes or No) • **Battery Packs (KW)**: 2 KW, 4 KW, and 6 KW Your preferences are as follows: • Among brands, **TVS is the least preferred, followed by Ola, while Ather is the most** **preferred EV brand**. • **IP67 type is the preferred** rating. • For battery capacity, **6 KW > 4 KW > 2 KW** in terms of performance and preference. Using these inputs, you build a **regression model** to quantify your preferences. The estimated coefficients of the model are provided in the figure below.
Source diagram or notation
Using this information answer the given subquestions.
How much is the weightage provided by the customer for the Brand?   [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q9

Question 10 NAT · 1.5 marks

**The following scenario is purely hypothetical** You are in the process of selecting an ideal EV scooter from several available options. The decision depends on three key attributes: • **Brand**: TVS, Ola, and Ather • **Water Resistance**: IP67 (Yes or No) • **Battery Packs (KW)**: 2 KW, 4 KW, and 6 KW Your preferences are as follows: • Among brands, **TVS is the least preferred, followed by Ola, while Ather is the most** **preferred EV brand**. • **IP67 type is the preferred** rating. • For battery capacity, **6 KW > 4 KW > 2 KW** in terms of performance and preference. Using these inputs, you build a **regression model** to quantify your preferences. The estimated coefficients of the model are provided in the figure below.
Source diagram or notation
Using this information answer the given subquestions.
How much is the weightage provided by the customer for the IP67 rating ? [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q10

Question 11 NAT · 1.5 marks

**The following scenario is purely hypothetical** You are in the process of selecting an ideal EV scooter from several available options. The decision depends on three key attributes: • **Brand**: TVS, Ola, and Ather • **Water Resistance**: IP67 (Yes or No) • **Battery Packs (KW)**: 2 KW, 4 KW, and 6 KW Your preferences are as follows: • Among brands, **TVS is the least preferred, followed by Ola, while Ather is the most** **preferred EV brand**. • **IP67 type is the preferred** rating. • For battery capacity, **6 KW > 4 KW > 2 KW** in terms of performance and preference. Using these inputs, you build a **regression model** to quantify your preferences. The estimated coefficients of the model are provided in the figure below.
Source diagram or notation
Using this information answer the given subquestions.
How much is the weightage provided by the customer for the battery type? [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q11

Question 12 NAT · 2.0 marks

A logistic model to classify the cards in a deck using the card image was built. The confusion matrix for the built model based on a sample of 210 cards is as given below. With this information, answer the given subquestions.
Source diagram or notation
What is the ACCURACY for the model? [Note: Enter your answer in **PERCENTAGE** rounded to TWO decimal places without the percentage symbol. For example: If your answer is “81.245%” then enter it as “81.25”]

A published solution is not available for this question yet.

Report a correction for Q12

Question 13 NAT · 2.0 marks

A logistic model to classify the cards in a deck using the card image was built. The confusion matrix for the built model based on a sample of 210 cards is as given below. With this information, answer the given subquestions.
Source diagram or notation
What is the PRECISION for the model when predicting “Diamonds”? [Note: Enter your answer in **PERCENTAGE** rounded to TWO decimal places without the percentage symbol. For example: If your answer is “81.245%” then enter it as “81.25”]

A published solution is not available for this question yet.

Report a correction for Q13

Question 14 NAT · 2.0 marks

A logistic model to classify the cards in a deck using the card image was built. The confusion matrix for the built model based on a sample of 210 cards is as given below. With this information, answer the given subquestions.
Source diagram or notation
What is the RECALL for the model when predicting “Club” [Note: Enter your answer in **PERCENTAGE** rounded to TWO decimal places without the percentage symbol. For example: If your answer is “81.245%” then enter it as “81.25”]

A published solution is not available for this question yet.

Report a correction for Q14

Question 15 NAT · 1.0 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
**What is the accuracy of the model?** [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q15

Question 16 NAT · 1.5 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
**What is the precision of class 1 (Delayed)?** [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q16

Question 17 NAT · 1.5 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
**What is the sensitivity of the model?** [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q17

Question 18 NAT · 1.5 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
**What is the precision of class 0 (Not Delayed)?** [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q18

Question 19 NAT · 1.5 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
**What is the specificity of the model?** [Note: Enter your answer in **PERCENTAGE** rounded to FOUR decimal places without the percentage symbol. For example: If your answer is “81.23445%” then enter it as “81.2345”]

A published solution is not available for this question yet.

Report a correction for Q19

Question 20 MSQ · 1.0 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
What is the correct interpretation of the coefficient b1? (select all this is/are applicable)
A.
If the number of previous hospital visits increases by 1, the log of odds of the patient being readmitted increases by **0.8**, assuming X2 remains constant.
B.
If the number of previous hospital visits increases by 1, the odds of the patient being readmitted increase by approximately **123%** (e\(^{0.8}\)=2.23), assuming X2 remains constant.
C.
If previous hospital visits increase by 1, the probability of readmission increases by 0.8, assuming X2 remains constant.
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q20

Question 21 MSQ · 1.0 marks

A hospital wants to assess the performance of its **logistic regression classification model**, which predicts whether a patient will be **readmitted within 30 days** after discharge.The hospital uses two variables to predict readmission: • **X1 – Number of previous hospital visits** in the past year • **X2 – Length of stay** in days Table 1 presents the data used for model development, while Table 2 provides the estimated coefficients and classification threshold from the logistic regression model. To validate the model, the actual readmission outcomes observed by the hospital are shown in Table 3.
Source diagram or notation
Source diagram or notation
Given this information answer the given sub-questions
What is the correct interpretation of the coefficient b2? (choose all that is/are applicable)
A.
If the length of stay increases by 1 day, the log of odds of the patient being readmitted increases by **0.6**, assuming X1 remains constant.
B.
If the length of stay increases by 1 day, the odds of the patient being readmitted increase by approximately **82%** (e\(^{0.6}\)=1.82), assuming X1 remains constant.
C.
If the length of stay increases by 1, the probability of readmission increases by 0.6, assuming X1 remains constant.
D.
None of these

A published solution is not available for this question yet.

Report a correction for Q21

Question 22 NAT · 0.5 marks

Dr. Milo wants to advertise his new brand of turion centres called “Torture Students”. Currently promotion plans are underway for this year’s admission. Advertising alternatives include TV, Radio and Social Media. The estimated audiences per advertisement (who will enrol after viewing the advertisement) and costs per advertisement for the different alternatives are shown in Table-2. To ensure a balanced use of advertisement media (1) radio advertisements must not exceed 70% of the total number of advertisements authorised (2) amount authorised for TV advertisements should account for exactly 30% of the total spending (3) Amount of spending on social media advertisements must be exactly 25% of the other two spending. The promotional budget is limited to Rs. 1,82,000, and Dr. Milo does not need to spend all the available money to maximize the number of enrolments. Then answer the given sub-questions.
Source diagram or notation
How many (count of) decision variables are present in the standard (canonical) form of the primal problem? (Note: Specify the count of variables. **Not the count of notations**)

A published solution is not available for this question yet.

Report a correction for Q22

Question 23 NAT · 1.0 marks

Dr. Milo wants to advertise his new brand of turion centres called “Torture Students”. Currently promotion plans are underway for this year’s admission. Advertising alternatives include TV, Radio and Social Media. The estimated audiences per advertisement (who will enrol after viewing the advertisement) and costs per advertisement for the different alternatives are shown in Table-2. To ensure a balanced use of advertisement media (1) radio advertisements must not exceed 70% of the total number of advertisements authorised (2) amount authorised for TV advertisements should account for exactly 30% of the total spending (3) Amount of spending on social media advertisements must be exactly 25% of the other two spending. The promotional budget is limited to Rs. 1,82,000, and Dr. Milo does not need to spend all the available money to maximize the number of enrolments. Then answer the given sub-questions.
Source diagram or notation
How many (count of) constraints (excluding the non-negativity constraints) are present in the standard (canonical) form of the primal?

A published solution is not available for this question yet.

Report a correction for Q23

Question 24 NAT · 0.5 marks

Dr. Milo wants to advertise his new brand of turion centres called “Torture Students”. Currently promotion plans are underway for this year’s admission. Advertising alternatives include TV, Radio and Social Media. The estimated audiences per advertisement (who will enrol after viewing the advertisement) and costs per advertisement for the different alternatives are shown in Table-2. To ensure a balanced use of advertisement media (1) radio advertisements must not exceed 70% of the total number of advertisements authorised (2) amount authorised for TV advertisements should account for exactly 30% of the total spending (3) Amount of spending on social media advertisements must be exactly 25% of the other two spending. The promotional budget is limited to Rs. 1,82,000, and Dr. Milo does not need to spend all the available money to maximize the number of enrolments. Then answer the given sub-questions.
Source diagram or notation
If the standard (canonical) form of the primal is converted to a dual, then how many (count of) constraints (excluding the non-negativity constraints) are present in the dual?

A published solution is not available for this question yet.

Report a correction for Q24

Question 25 NAT · 1.0 marks

Dr. Milo wants to advertise his new brand of turion centres called “Torture Students”. Currently promotion plans are underway for this year’s admission. Advertising alternatives include TV, Radio and Social Media. The estimated audiences per advertisement (who will enrol after viewing the advertisement) and costs per advertisement for the different alternatives are shown in Table-2. To ensure a balanced use of advertisement media (1) radio advertisements must not exceed 70% of the total number of advertisements authorised (2) amount authorised for TV advertisements should account for exactly 30% of the total spending (3) Amount of spending on social media advertisements must be exactly 25% of the other two spending. The promotional budget is limited to Rs. 1,82,000, and Dr. Milo does not need to spend all the available money to maximize the number of enrolments. Then answer the given sub-questions.
Source diagram or notation
If Dr. Milo has decided to invest Rs. 1,05,000 in TV and Rs. 45,000 in Social Media and Rs. 32,000 in Radio. Then how many (count of) decision variables in the dual (which is formulated based on the standard (canonical) form of the primal) will have a **zero** value?

A published solution is not available for this question yet.

Report a correction for Q25

Question 26 NAT · 1.5 marks

Dr. Milo wants to advertise his new brand of turion centres called “Torture Students”. Currently promotion plans are underway for this year’s admission. Advertising alternatives include TV, Radio and Social Media. The estimated audiences per advertisement (who will enrol after viewing the advertisement) and costs per advertisement for the different alternatives are shown in Table-2. To ensure a balanced use of advertisement media (1) radio advertisements must not exceed 70% of the total number of advertisements authorised (2) amount authorised for TV advertisements should account for exactly 30% of the total spending (3) Amount of spending on social media advertisements must be exactly 25% of the other two spending. The promotional budget is limited to Rs. 1,82,000, and Dr. Milo does not need to spend all the available money to maximize the number of enrolments. Then answer the given sub-questions.
Source diagram or notation
If Dr. Milo has decided to invest Rs. 1,05,000 in TV and Rs. 45,000 in Social Media and Rs. 32,000 in Radio. What is the **objective function value** for the standard (canonical) form of the primal?

A published solution is not available for this question yet.

Report a correction for Q26

Question 27 NAT · 1.5 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of “X1” in Model-1? (Note: Input your answer rounded **to two decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q27

Question 28 NAT · 1.5 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of “X2” in Model-1? (Note: Input your answer rounded **to two decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q28

Question 29 NAT · 1.5 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of “X3” in Model-1? (Note: Input your answer rounded **to two decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q29

Question 30 NAT · 2.0 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of “X4” in Model-1? (Note: Input your answer rounded **to two decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q30

Question 31 NAT · 2.0 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of “X5” in Model-1? (Note: Input your answer rounded **to two decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q31

Question 32 NAT · 1.0 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the value of the F-statistic for Model-1? (Note: Input your answer rounded **to two decimal** **places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q32

Question 33 NAT · 1.0 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the VIF associated with “Initial Age (weeks)”? (Note: Input your answer rounded **to two** **decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q33

Question 34 NAT · 1.0 marks

A company has developed a new fodder for pigs. To model the “increase in weight of a piglet (in pounds) in one week”, an experiment is performed in which eight piglets were exclusively feed the fodder. Table-3 below provides the data on “Initial weight (pounds)”, “Age of the piglet (weeks)”, “Actual Weight gained after one week (pounds)” and “Predicted Weight gained after one week (pounds)”
Source diagram or notation
The different models developed are presented in the below Figures (which specify the partial regression outputs). Given this information, answer the given sub-questions
Source diagram or notation
Model-1: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-2: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-3: Partial output when regressing “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-4: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
Source diagram or notation
Model-5: Partial output when regression “Weight Gained (pounds)”, “Initial Weight (pounds)” and “Initial Age (weeks)”
What is the VIF associated with “Initial Weight (pounds)”? (Note: Input your answer rounded **to two** **decimal places**. For example, if your answer is “1.235” then enter the answer as “1.24”)

A published solution is not available for this question yet.

Report a correction for Q34